VA Combined Rating Calculator 2026 — calculate your combined disability rating
🇺🇸 Updated May 2026  ·  38 CFR § 4.25

Combined Rating Calculator

The complete 2026 guide to calculating combined VA disability ratings under 38 CFR § 4.25. Master the combined ratings table, the order-of-operations rule, the bilateral factor, the rounding rule, and how to use the formula to verify your VA decision.

📅 Published May 17, 2026 ⏱ 13 min read ✍️ VA Claims US Editorial Team
38 CFR § 4.25 Combined Ratings Table
High → Low Order of Operations
38 CFR § 4.26 Bilateral Factor Rule
10% Final Rounding Increment

The VA's combined rating formula is one of the most counterintuitive parts of the entire disability system. Veterans constantly ask why their three 30% ratings don't combine to 90% — they combine to 66%, which rounds to 70%. The actual formula lives in 38 CFR § 4.25 and follows a "whole person" theory that's been in place for decades.

This guide explains exactly how the combined rating formula works, walks through worked examples, covers the bilateral factor and the rounding rule, and gives you the tools to verify your VA decision letter against the actual regulation.

💡 Key Takeaway The combined ratings formula treats your body as having 100% efficient capacity. Each disability reduces that capacity by its percentage applied to whatever remains — not to the original 100%. So a 30% disability followed by another 30% reduces capacity by 30% + (30% × 70%) = 30% + 21% = 51% combined, rounded to 50%. Three 30% conditions combine to 66%, rounded to 70% — not 90%.


What a Combined Rating Is

Your combined rating is the single percentage the VA uses to determine your monthly compensation when you have multiple service-connected conditions. It's not an arithmetic sum — it's the result of applying the formula in 38 CFR § 4.25 to your individual condition ratings.

Combined ratings are always rounded to the nearest 10% (0%, 10%, 20%, 30%,... 100%). The rounded combined rating is then matched to the VA pay table to determine your monthly disability compensation.


Why VA Math Isn't Simple Addition

If the VA used simple addition, a veteran with 10 service-connected conditions at 30% each would be rated 300% — which makes no sense because no person can be more than 100% disabled.

The combined ratings formula solves this by treating successive disabilities as affecting the remaining capacity of a person, not the original 100%. This caps the maximum combined rating at 99.99% no matter how many conditions you have, with the final value rounded to 100% if it exceeds 95%.

🧮
Foundation
How the VA Calculates Combined Ratings — Foundation Guide
→


The 38 CFR § 4.25 Combined Ratings Table

The actual regulation provides a lookup table for combining two ratings at a time. The table is read by finding one rating along the top and the other along the side; the intersection is the combined result.

You can build it yourself using the formula. For ratings A and B (A >= B):

ℹ️ Combined Rating Formula Combined = A + B × (100 − A) / 100
In words: Add A. Then add B's percentage of whatever's left after A. The result is your combined rating before rounding.

For three or more ratings, apply the formula iteratively — combine the two highest first, then combine that result with the next-highest, and so on.


Step-by-Step Calculation Walkthrough

1

List All Service-Connected Ratings

From your decision letter, write down every individual condition rating.

2

Rank From Highest to Lowest

Order matters. The formula must be applied highest-first.

3

Apply the Formula to the First Two Ratings

Use Combined = A + B × (100 − A) / 100. The result is a working combined rating (don't round yet).

4

Combine the Result with the Next Rating

Repeat the formula using the working combined as A and the next rating as B. Continue until all ratings are applied.

5

Apply the Bilateral Factor (If Applicable)

If any of your ratings affect paired extremities, calculate the bilateral factor on those ratings (see Section 7) before combining with other conditions.

6

Round Only at the End

Round the final number to the nearest 10%. This is your official combined rating.


Example: 2 Conditions

Scenario: Veteran has PTSD at 70% and tinnitus at 10%.

  • Step 1: PTSD = 70%, Tinnitus = 10%
  • Step 2: Ranked 70%, 10%
  • Step 3: Combined = 70 + 10 × (100 − 70) / 100 = 70 + 10 × 30 / 100 = 70 + 3 = 73%
  • Step 4: Round 73 → 70%
  • Combined Rating = 70%

Notice that 10% tinnitus added on top of 70% PTSD only contributes 3% before rounding — and since rounding 73 still produces 70%, the tinnitus didn't move the combined tier. This is the "diminishing returns" effect.


Example: Multiple Conditions

Scenario: Veteran has PTSD at 50%, sleep apnea at 50%, back at 20%, knee at 10%, and tinnitus at 10%.

  • Ranked: 50%, 50%, 20%, 10%, 10%
  • Combine 50% + 50% = 50 + 50 × 50 / 100 = 50 + 25 = 75%
  • Combine 75% + 20% = 75 + 20 × 25 / 100 = 75 + 5 = 80%
  • Combine 80% + 10% = 80 + 10 × 20 / 100 = 80 + 2 = 82%
  • Combine 82% + 10% = 82 + 10 × 18 / 100 = 82 + 1.8 = 83.8%
  • Round 83.8 → 80%
  • Combined Rating = 80%

Five separate ratings totaling 140% in simple addition only combine to 80% under VA math. Each successive condition contributes less than the previous one.


Bilateral Factor Calculation

Under 38 CFR § 4.26, when you have disabilities affecting paired extremities (both arms, both legs, or one arm + one leg), the VA adds a 10% bilateral factor bonus.

How to Apply the Bilateral Factor

  1. Combine the ratings of just the paired extremity conditions using the standard combined ratings formula
  2. Multiply that combined number by 10% (i.e., 0.10)
  3. Add the bilateral factor to the combined paired-extremity rating
  4. Combine the adjusted total with all your other (non-bilateral) ratings

Example: 20% right knee + 20% left knee + 50% PTSD

  • Combine the knees: 20 + 20 × 80 / 100 = 20 + 16 = 36%
  • Bilateral factor: 36 × 10% = 3.6%
  • Adjusted knee rating: 36 + 3.6 = 39.6%
  • Combine with PTSD: 50 + 39.6 × 50 / 100 = 50 + 19.8 = 69.8%
  • Round 69.8 → 70%

Without the bilateral factor, the same conditions would only combine to 68% (rounded to 70%). In this case, the bilateral factor didn't change the rounded tier — but in close-to-threshold scenarios (e.g., 64% vs. 65%), it can be the difference between two rating tiers.

⚖️
Related
VA Bilateral Factor Explained — Deep Dive Guide
→


The Critical Rounding Rule

Under 38 CFR § 4.25(a), the VA rounds to the nearest 10% only at the very end of the calculation. The rounding boundary is at the midpoint:

  • 1–4 → 0%
  • 5–14 → 10%
  • 15–24 → 20%
  • 25–34 → 30%
  • 35–44 → 40%
  • 45–54 → 50%
  • 55–64 → 60%
  • 65–74 → 70%
  • 75–84 → 80%
  • 85–94 → 90%
  • 95–100 → 100%

The 95% → 100% boundary is especially valuable. Many veterans reach the 100% schedular rating not by hitting 100% exactly, but by accumulating enough conditions to push the pre-round number above 95%.


Combined Rating Calculator Tools

A good combined rating calculator should:

  • Accept multiple condition ratings in any order
  • Automatically rank them highest-to-lowest internally
  • Show both the pre-round and rounded combined rating
  • Optionally apply the bilateral factor when you flag paired-extremity conditions
  • Display the step-by-step formula application for transparency

The VA Claims US calculator at vaclaims.us/va-tools-calculators/ handles all of these and shows you exactly how the formula was applied to your specific ratings.


Verifying Your VA Decision Letter

VA decision letters often state combined ratings without showing the formula. Here's how to verify the math:

  1. List every individual condition rating from the decision letter
  2. Apply the combined ratings formula yourself (or use a calculator)
  3. Check whether the bilateral factor was applied — and if it should have been but wasn't, that's an error
  4. Compare the final rounded number to what the VA stated
  5. If your math doesn't match, request a Higher-Level Review or Supplemental Claim with a written explanation
⚖️
Related
VA Higher-Level Review Guide
→


Common Combined Rating Mistakes

  • Adding ratings as simple sums: 30% + 30% + 30% does not equal 90%. It equals 66%, rounded to 70%.
  • Wrong order of conditions: Applying ratings in non-decreasing order changes intermediate values (though the final result is mathematically identical, intermediate confusion can lead to error).
  • Missing the bilateral factor: If you have paired extremity conditions and the VA didn't add bilateral factor, request review.
  • Rounding too early: Rounding intermediate values changes the final outcome. Only round once, at the very end.
  • Forgetting SMC-K stacking: SMC-K ($136/month for loss of use of a creative organ) is added on top of the combined rating-based pay, not factored into combined rating math.
🇺🇸 Free Combined Rating Review

Think Your Combined Rating Is Wrong? Get a Free Review.

Our team at VA Claims US verifies VA combined rating math and helps veterans claim missing bilateral factor, missed conditions, and SMC entitlements. Free review.

🚀 Get My Free Claim Review No obligations. 100% free consultation. About VA Claims US →


Frequently Asked Questions

Apply the formula in 38 CFR § 4.25 to your individual condition ratings, ranked highest to lowest. For each successive rating, calculate Combined = A + B × (100 − A) / 100 where A is the running combined and B is the next condition. Apply the bilateral factor if applicable. Round to the nearest 10% only at the end.
Because the VA uses the "whole person" theory under 38 CFR § 4.25. Each successive disability is applied to your remaining healthy percentage, not the original 100%. This prevents the combined rating from exceeding 100% no matter how many conditions you have. Simple addition would produce ratings like 250% which makes no medical sense.
Three 30% conditions combine to 65.7%, rounded to 70%. Math: 30 + 30 × 70/100 = 51%. Then 51 + 30 × 49/100 = 51 + 14.7 = 65.7%. Rounded to 70%. Each successive 30% rating contributes less than the previous one — this is the diminishing returns effect.
The bilateral factor under 38 CFR § 4.26 adds 10% to the combined rating of conditions affecting paired extremities — both arms, both legs, or one arm + one leg. After combining the paired-extremity ratings normally, multiply that result by 10% and add it back. Then combine with all your other conditions. This factor is one of the most commonly missed by the VA.
The VA rounds to the nearest 10%. Values ending in 5 round up: 65% → 70%, 75% → 80%, 95% → 100%. Values below the midpoint round down: 64% → 60%, 74% → 70%, 94% → 90%. Rounding only happens at the very end, not during intermediate steps.
Yes. You don't need one 100% rating to reach the 100% schedular tier. If your combined pre-round rating reaches 95% or higher, it rounds to 100%. Many veterans accumulate to 95-99% through stacked conditions (e.g., 70% PTSD + 50% sleep apnea + 30% back + 30% knees) and reach 100% schedular this way.
The combined ratings formula gives the same final result regardless of order — the math is commutative. However, applying ratings in non-decreasing order (highest first) is the standard convention in 38 CFR § 4.25 and makes the working values easier to follow. Intermediate sums look different in different orders, but the final combined rating is identical.
VA Claims US Editorial Team
VA Claims US Editorial Team
vaclaims.us
The VA Claims US editorial team is dedicated to helping veterans and their families understand and navigate the VA disability system. Our content is reviewed for accuracy against current VA regulations and updated whenever rates or policies change. Have a question? Contact us here.